The dosing pump DC 200 is used for dosing liquid admixtures into the flow of concrete when the technology of spraying concrete in a dry or wet way is employed.

The liquid admixture is used during wet shotcreting to shorten the time of concrete hardening, to increase the resistance of concrete at low temperatures, and the like.


  • smooth and accurate control of dosing
  • visual control on a digital display
  • feasible to run empty
  • self-suction capability
  • easy maintenance
  • long service life



princip fungovani

Working principle

The principle of the DC 200 dosing pump is a hose pump, the main priority of which is exact dosing without backstroke, easy maintenance, ability to run empty, long serviceability, and self-priming ability (up to 9.5 m).

The dosing pump is driven by an electrical motor with a frequency inverter which makes it possible to control the amount of batch whereas the existing amount of batch is indicated on a digital display (in l/hour). The pump can be used for dosing liquid admixture itself (when spraying by the so-called wet method) or dosing the liquid admixture and water (when spraying by the so-called dry method).

The dosing pump is equipped with a pressure switch turning off the operation of the pump when the maximum pressure is exceeded (e.g. when the cock on the spray nozzle is closed), and conversely, the pump is automatically turned on with pressure decrease. The system of check valves, relief valves, and reduction valves inhibits the leakage of the admixture into the water sub-circuit.


technicka data

Technical data

Parameter DC 200
Output [l/hod] 15 – 200
Max. pressure [bar] 7,5
Input power[kW] 1,1
Mains connection 3 NPE ~ 50 Hz
Length [mm] 1030
Width [mm] 650
Height [mm] 800
Weight [kg] 160

It is suitable to use the dosing pump DC 200 with the concrete spraying machine SSB 14SSB 05SSB 24 or SSB 02, the maximum functional output of which reaches as many as 2 – 7 m3/hour.






Practical demonstration


Ke stazeni



princip fungovani

Fields of application